ATEX, explosion protection for climate chamber

ATEX and explosion protection

What is explosion protection and when is it required? When must test systems be designed in accordance with ATEX directives? These are just some of the questions asked by our customers. More

Acceleration signal, electrodynamic vibration test system, IMV Corp.

Mechanism of vibration test systems

For the vibration test systems, the vibration generators correspond to the loud speakers of the audio systems. They have the vibration controllers instead of the sound source to drive the vibration generators. More

The Worlds first fully automatic ECO vibration test system

The Worlds first fully automatic ECO vibration test systems – VIDEO

Reduce your carbon footprint – Upgrade your amplifier to get the complete set of benefits. Lower your noise emission. Save up to 80% on running costs. – Remote system diagnostics. More

field power and cooling blower speed_IMV ECO

How does the IMV ECO System adjust the field power?

The IMV ECO-system controls the field current between 0% and 100%, using a power converter with a control switching frequency of over 20kHz. More

field power and cooling blower speed_IMV ECO

How does the IMV ECO System adjust the cooling blower speed?

The IMV ECO System controls the blower speed between 5% and 100%, using a power converter with a control switching frequency of over 20kHz. More

IMV ECO System save energy and money

How does IMV’s ECO System save energy and money?

Conventional shaker systems set the field power and blower speed to the nominal settings as soon as the system is started. Only the armature power is varied according to the force required for the test. More

 the IMV ECO System is quiet

Why is IMV’s ECO System so quiet?

In minimizing the energy used by IMV’s ECO-shaker to run any particular test, then the cooling requirement is also minimized. Not only does this save energy, but it also means that for most tests, the ECO System is quiet. More

high shock velocity_IMV ECO System

IMV ECO System – High shock velocity

Where a test requires a high shock velocity, traditional shaker systems use a matching transformer to achieve the necessary higher armature voltage. More

IMV ECO System for air-cooled  and water-cooled shakers

Can the IMV ECO Technology be used for water-cooled shakers?

This technique is equally applicable to water-cooled shakers and IMV offers its range of ECO Systems for both air-cooled and water-cooled shakers. More

IMV ECO shakers

Advanced service support – Maintenance manager – IMV ECO System

IMV’s ECO System monitors up to 200 parameters, including for example power module operating conditions, system temperatures, interlock status, controller status, 3-phase supply conditions and so on. More

IMV ECO shakers

IMV ECO System – I prefer my existing controller, do I need to use IMV’s K2 controller?

IMV’s advanced K2 controller has been proven in the most extreme control environments, from single axis, single-point control through to simultaneous multi-axis, multi-point control. More

IMV ECO shakers

IMV ECO System – Traditional vibration test systems

Shaker systems have always been designed as individual components; amplifier, shaker, cooling fan, controller. More

field power and cooling blower speed_IMV ECO

IMV ECO System – But other shaker systems have an adjustable field?

Shaker systems that have the ability to vary the field power have long been used in vibration testing, with a typical option to set the field current to a level of 70% of the nominal value. More

SIMPATI Time labs visual documentation system

The SIMPATI TimeLaps visual documentation system

Digital camera images are generated by specialist software at set intervals and led in a general archives folder, in addition to and in correlation with the capture of traditional measured data. More

Reduce nitrogen oxide emissions, AdBlue temperature control system, Weiss

New test system for motor developers to reduce nitrogen oxide emissions

Weiss Technik has now developed the world's first AdBlue temperature control unit for fuel-filling tests, to test its use under reproducible conditions, to gain insights relevant for series production. More

Vibration tests with non-Gaussian distribution

New software supports vibration tests with non-Gaussian distribution

The purpose of the non-Gaussian method is to adapt the signals used for excitation in the lab to real-life conditions as much as possible in order to obtain identical stress. More

WEISS Green Mode Label

Save Energy with „Green Mode“ – Weiss Technik

Environmental friendly technology from Weiss Umwelttechnik – Energy efficiency – Green Mode More

ATEX and explosion protection, Votsch

ATEX and explosion protection (Vötsch Technik)

Preventing the creation of explosive atmosphere or preventing sources of ignition are two widely used ways of reducing the risk. More

J-series, single-axis vibration system

Installation requirements air-cooled vibration systems from IMV

Installation requirements vibration systems: power supply, pressure air supply, environment, sables and hoses, preliminary work, additional points that might be relevant during the planning and should be considered More

Energy saving vibration test system

What difference do the low-energy ECO shakers make in terms of energy consumption?

ECO shaker offers energy savings up to 80% depending on the load under which the equipment is operated. The smaller the load, the more energy can be saved compared to a conventional dynamic test equipment. More

Air cooled single axis vibration test system

Conditions for installation of IMV air-cooled vibration test systems

Shaking tests require a 3-axis vibration profile and 3 axial fixture. The lowest test frequency would be 1 Hz. What are the conditions for installation of vibration test systems? More

Vibration test systems

What is the aim of vibration and shock testing?

In order to design and construct more reliable products, it is highly recommended that vibration and shock tests be incorporated in sample or finished product tests. More

Principle of vibration

What is vibration? – Fundamental concept of vibration

Have a look at the unknow world of vibration – Fundamental concept of vibration. Why does vibration happen? 
Why do you need vibration measurement? More

3-axis vibration test system

What is vibration? – Generating vibration and vibration testing

Why do we need artificial vibration generation? 
Let's learn purposes and importance of vibration testing. More

What is vibration testing

What is vibration? – What is the need for vibration measurement?

Measuring vibration. What can we find out by measuring vibration? 
Let's find out the significance of vibration. More

Pages: 12